• 200~240V,1 phase power supply
• Sensorless flux vector control
• Starting and speed control
• inversion of operating direction
• decel,acceleating,stopping
• motor and speed controller protection
• UL/CSA,CE
• output frequency : 0.5~200 Hz
• switching frequency : 4 KHz(auto)
• braking torque : 50 % of nominal motor torque
• max. transient current : 120 % for 20 sec, 150% for 1 sec
• 1 AI, 4 LI,1AO,1 LO

ATV31 Inverter

• 단상 200/240V : 0.18~2.2Kw
• 삼상 200/230V : 0.18~15Kw
• 삼상 380/500V: 0.37~15Kw
• 제어형식 :SVC , V/F
• 출력주파수 : 0~ 500Hz in 0.1Hz
• 스윗칭주파수: 2~16 KHz(자동,수동)
• 과부하내력 : 60 secs @ 150%
• 아나로그 입력 : 3
• 논리입력수 : 6
• 리레이출력 : 3 개(프로그램가능)
• 연속온도 : 50 도
• EMC 필터내장
• 통신 : Modbus,RS-485, CAN open

• 용도: 공조,펌프,휀 등
• 제어방식: SVC,V/F
• 정격전압 : 380~460V(690V)
• 출력주파수 : 1 ~ 500Hz
• 스윗칭 주파수 : ~ 16 KHz
• 속도비 : 1:10
• 궤환회로 : PI
• 논리입력 ;4개
• 최대출력 : ~ 315 Kw
• 부스터 펌프전용 카드(선택)

• 최대 5대까지 자동운전
• EMC 필터내장(75Kw 까지)
• 경제적인 가격

• EMC filter integrated
• High torque(170%Tn), normal torque   (120%Tn)
• starting/stopping,dynamic braking,braking to stand still,speed control
• energy saving, PI regulator
• brake sequence
• speed control loop with tacho,encorder
• +/- speed,S ramp,U ramp,preset speed,jog operation
• UL/CSA,CE
• outut frequency range: 0.1~500Hz
• brake torque : 30 % Tn
• V/F ratio : sensorless flux vector control
• transient over torque : 200 % of Tn for 2 s, 170% of Tn for 60 s

• C ,EN, NF C, VDE, UL,CSA,CE
• 0.75~55 Kw
• output frequency : 0~450 Hz
• switching frequency : 0.5~12 depend on model.
• speed range : 1 ~ 1000 closed loop with encoder,1~100 open loop
• speed precision : +/- 1%
• Trasient over torque : 200 % for 2 sec,170% for 60 sec
• braking torke : 30 % of Tn
• V/F ratio : Flux vector control with or without sensor
• acceleration and deceleration ramps: linear, S,U or totally customerized
• Time : 0.01 to 999.9 secs
• communication : RS-485
• type of encoder : incremental, Rs-422 compatiable, max 5000 /rev,min 100/rev.

ATV68F : Flux vector control with sensor ,with integrated encoder feedback card

• standard torque : 120 % Tn
• high torque  : 150 % Tn
• dual configuration(2motors)
• integrated PID controller
• 7 possible preset speeds
• jog operation
• brake release sequence for transient movement and hoisting
• user defineable analog and logic inputs
• +/- speed
• skip frequency
• compare function
• logic function
• starting and speed regulation via flux vector control
• protection of motor speed
• auto tunning
• high over torque on start -up
• separate 24V supply for control circuit
• switching frequency : 2.5-5-10 KHz

• 단상 220V: 0.75~1.5Kw
• 삼상 220V : 0.37~22Kw
• 삼상 380V /415V : 1.5~45Kw
• 삼상440/480 V : 1.5~45Kw
• 삼상 690V : 30~75Kw
• voltage ramp control

• TCS(Torque Control )type
• class 10. 20 selectable
• current limiting : 2~7 In
• freewheel,stop controoled by torque lamp, breaked stop mode
• current adjustment : 0.5~1.3
• UL/CSA,IEC,NF C,VDE,DNV
• 208 V/ 380 V/ 440 V version
• motor power : 2.2 ~800 Kw
• cascading start, stator loss - compensation, voltage boost
• adjustable starting torque : 10%~